Barracuda Networks SP4 Bedienungsanleitung PDF herunterladen (Seite 36)

BASIC CONNECTION TO A SINGLE CODER (DIRECT LINK)

ENG

Axel Technology srl

www.axeltechnology.com

S0 Register represents the number of rings before Auto-Answer. It sets the number of the rings required before the

modem automatically answers a call. Range: 0-255 rings. Setting this register to zero disables auto-answer mode. S0 =

n, where n is the number of rings. It is advised S0=2

The S2 register (Escape Code Character) specifies the ASCII value of the character used in the escape code. (The

escape code is the escape character entered three times in succession.) When the modem is in connect state and it

receives the escape code, the modem enters command state. Normally, setting register S2 to 128 or above disables the

escape code character. It is advised to set S2=255

You should load those settings in the modem memory, so that they are automatically loaded at the modem start-up.

Please refer to the modem user guide for further reference.

For proper configuration of BSN software in order to support modem communication refer to Part TWO of this manual.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 117 118

Keine Kommentare

Barracuda Networks SP4 Bedienungsanleitung Seite 36