Barracuda Networks SP4 Bedienungsanleitung PDF herunterladen (Seite 112)

APPENDIX E – FIRMWARE UPGRADE PROCEDURE

ENG

112

Axel Technology srl

www.axeltechnology.com

34 APPENDIX E – FIRMWARE UPGRADE PROCEDURE

The Barracuda comes from the factory with the most recent firmware installed just prior to shipping. When required, the

firmware can be updated with the latest available version. In order to upgrade the processor, please follow this

procedure. FW Upgrade can be performed on Windows environment.

After an initialization of the device (firmware upgrade), all user presets and adjustments may be

erased and/or overwritten by the new factory setup! Please save the current configuration by

means of the Configuration Editor tool prior to proceeding with the firmware upgrade.

When upgrading the firmware, do not forget to install the new associated software version of PC

remote control. There is a direct correspondence between the firmware and software versions.

For example, the rel. 3.0 of Pc software requires the firmware version 3.0 installed on the unit

and vice versa.

More precisely, the two first digits must match, as possible sub-releases (identified by the third

digit) are not involved in the firmware/software compatibility.

As general rule, software version X.Y.Z runs with firmware version X.Y.K

1) MAKING THE UNIT READY FOR UPGRADING

A. Shut off the unit

B. Remove the equipment cover and the guarantee labels

C. Set the jumper JP1 of the Mother board to the LEFT (external) position. Jumper is located near to

the large battery, on the left hand (see highlighted jumper in the picture).

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 118

Keine Kommentare

Barracuda Networks SP4 Bedienungsanleitung Seite 112